B1003863
B1003863-1B1003863-2B1003863-3

2500mW Pro Laser Engraving Machine CNC DIY Engraver

€459.99

Brand: EleksMaker
Model: pro 2.5W
Wavelength: 445nm
Control Board: EleksMana SE
Communication Port: MircoUSB
Laser Quick Replace: Support
Stepper Motor: 42H34S-1304A
Power Input: AC100-240V
Sysytem Support: Win XP/7/8/10
Engrave Mode: Photo, Word, Scan, outline, Pixel Laser Engraving
Supported Formats: jpg, bmp, svg, G-code
Material: Stainless Steel and Acrylic
Working Voltage: DC 12V
Working Current: DC 4-5A
Laser Power: 2.5W / 2500mW
Control Software System: Candle, EleksCam, T2-Laser, Benbox, GrblController, LiteFire, Laser GRBL, etc.
Engraving Accuracy: 0.01mm
Engraving Area: 30x40cm / 11.81 x 15.75inch (maximum)
Assembled Product Size: 60x46x18cm / 23.62×18.11×7.09inch (L*W*H)

Laser machine installation, software downloading, software setting ,operating instructions and FAQ are here.
Laser module self-checking tips link
The whole assemble and operating manual link is here
You can also watch the video to do it

SKU: B1003863 Category:

Product Description

Can Engrave: Wood, Plastic, Paper, Bamboo, Ox Horn, Leather, Sponge Paper, etc.
Can not engrave: Metal, Stone, Ceramics, Glass, Reflective or Transparent Material
Certification: CE, FCC, FDA
Function: ideal for amateur laser engraving usage low-light positioning and freedom positioning functions.

30X38cm ultra large engraving area,gantry shape design, no engraving height limitation.
Three stepper motor drive providing faster moving speed.
2500mW violet laser module with heatsink, high laser engraving power and long-term available.
Can print any pictures easily

Notice:
1. Black and Blue laser module will be sent randomly in US / AU Warehouse.(Only case color difference)
2. The frame joint is upgraded and will be easier to assemble.(Remove corner joints and add rubber pads)
You might receive the new / old version randomly.Please make sure you know it. Thank you.

Note(Please pay attention):
1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin!
2. The red cord is DC12v(+),black cord is GND(-), yellow cord is signal(S). Please make sure you know the wire position and connect
to the ManaSE board correctly!
3. The warranty period of laser module is one month. If you have any quality problem(Except individual situation like using the laser
module more than 30 minutes per time and casue the damage ), please feel free to ask our customer service for a help.
4. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module.
5. If you have any quality problem about the machine, please feel free to contact us. Many operative problem can be solved according
to your video and problem description. Thank you in advance.

Package List:
1 Set x 2500mW Laser Engraving Machine(Need to be assembled by you)

Reviews

There are no reviews yet.

Be the first to review “2500mW Pro Laser Engraving Machine CNC DIY Engraver”